High speed injection molding machine for thin-wall products

Features

·Innovative design of plasticizing system achieves low-temperature injection; it makes the machine energy-saving, environmental, and manufactures products with high tenacity and toughness.
·Advanced hydraulic system achieves low pressure injection; it makes the machine gain better mechanical protection, have longer mould service life, and manufactures products with low stress and deformation.
·Optimized control system achieves fast response speed; it makes the machine obtain higher shot rate in a short time and reaches the best within 0.3 seconds.

1、High speed：
It is the basic platform of this series which is designed special for thin-wall products. And the minimum thickness can achieve 0.25mm. Optional with accumulator can assist high speed injection, and injection speed can exceed 650 mm/s.
2、High precision：
Standard configuration of close-loop servo injection control makes the accumulator to be controlled precisely in injection process.
3、High stability：
Low vibration, high rigidity frame construction, and precise close-loop servo opening mold displacement device ensure the repeatable precision in the high speed rotation process of sending labels and taking products.

The powerful function and accuracy can help customers reduce the weight of the products and shorten the cycle time. Compared with the present industry standard, Power jet’s PKF IML automatic production system can reduce more than 10% product weight and shorten cycle time by 10%

Accumulator assists high speed injection, and the injection speed can reach over 650mm/s. Lighter and thinner products can be produced to meet the requirement.

Close-loop servo injection control makes accumulator to be controlled precisely in the injection process, and makes the products deviation of each lot smaller and quality more stable.

Special oil-circuit design greatly improves the injected acceleration & movement.

High rigid mechanical design can stabilize the production, improve the rate of finished products，and extend the service life.

The new optimized screw and barrel combination makes the production material temperature much lower, thus making the products with high toughness but not crisp.

More applications for high speed thin-wall products injection molding machine can be chosen:

Disposable fast food box production system

·To provide a full set of production system for fast food box, with shorter production cycle, higher stability, and more economy.
·To provide options from the workshop planning to mold selection, and from product planning to machine selection. To offer complete set of machine and molds with 2,4, or even 8 cavities.

Medical syringe production system

The machine is especially for medical syringe product in clean room, and with the hot runner mold, to realize new upgrade on medical products.
·Machine in fully enclosed design
·Closed lubrication system
·Design with no oil in product area

Special system for the production of bottle cap
the machine is an upgraded design for more rapid production of various kinds of bottle cap

Special applications for PC
To product sorts of high precision electrical equipments and electronic parts in PC, with a better forming and less deviation!

Parameter